+91-9811347199 saurabh.joshi@fanair.in
/// ESTD 2016

Dry/Wet Scrubbers in Delhi

Scrubbers Manufacturers in Delhi

Effective Pollution Control for Industrial and Commercial Applications

Dry and wet scrubbers are pollution-control systems designed to remove unwanted gases, fumes, particles, and other contaminants from exhaust air streams. They are used in industries where exhaust treatment is required to improve air quality and support cleaner manufacturing processes.

For industries looking for reliable air pollution control units, Dry/Wet Scrubbers Manufacturers in Delhi provide different scrubber configurations according to the type of pollutant, airflow, pressure, temperature, and application. Dry scrubbers use absorbent materials or chemical reactions, while wet scrubbers use liquid solutions to capture or neutralize contaminants.

Contact Us
Dry Scrubber Manufacturers in Rajasthan

Dry Scrubber

A Dry scrubber is designed to extract harmful gases and particulates from exhaust streams. It is a type of pollution control equipment. Dry scrubber are primarily used to abate acidic gases, like those associated with acid rain. This is one of the most common pieces of equipment found in manufacturing plants, because of its ability to handle high temperature, highly acidic exhaust streams.

Model no.
FAEK-1,2,3,4
Capacity
Upto 12000 CFM (Single Unit)
Max Capacity
Upto 60000 CFM (Multi Unit)
Applications
Asphalt Processing, Pharmaceuticals, Landfills And Biogas, Coaters, Textile Processing, Tar Removal, Curing Ovens, Vinyl Manufacturing, Oil And Gas, Acid Mist Control, Fertilizer Manufacturing, Wastewater Treatment, Steel Processing, Electronics, Food Processing, Cocoa Processing
Wet Scrubber Manufacturers in Rajasthan

Wet Scrubber

As the name suggest kitchen scrubber is used to scrub fumes from the cooking process. It draws the fumes from the kitchen through the hoods. These fumes will be scrubbed by high water jets due to which all the contaminants such as oil, grease etc. are trapped and clean air will be exhausted to the environment Fanair wet scrubber is highly efficient, very low pressure drop and hence maximum scrubbing efficiency.

Frame
Extruded Aluminium Profile
Base
Heavy Gauge Base Frame With Cast Al Corners
Casing
23+2 Mm Thick, Double Skin Panels Made Of 0.6 Mm Sheets With Poly Urethane Foam (PUF Of Density 38+2 Kg/ Cu. M) Injected Between Two Skins Or Single Skin In 1.6/1.8 Mm Gl Sheet.
Wet Section
Double Bank Gl Spray Header With Brass/PVC Spray Nozzles.
Blowers
DIDW Centrifugal Blowers, Common Rail Base For Blower Motor Assembly On Vibration Isolator Pads
Motors
TEFC Type, Three Phase Motor Of Standard Make.
Motor Stand
Adjustable Motor Mounting Fixture.
Pulleys
Adjustable Taper Bush Pulleys
Pumps
Monoblock Pumps Of Standard Make.
Sump
SS 304/ Gl With FRP Tank With Socket Connections For Water In Overflow And Drain Complete With Y Strainer, Ball Cock Etc.

What Are Dry and Wet Scrubbers?

Scrubbers are pollution-control systems installed in exhaust and ventilation systems. They handle contaminated air or gases before the exhaust is released into the environment. The suitable scrubber type depends on the characteristics of the exhaust stream and the pollutants that need to be removed.

Dry/Wet Scrubbers in Delhi may be used for industrial processes, chemical exhaust, pharmaceutical applications, kitchen exhaust, and various other applications. The system may be selected according to airflow, static pressure, pollutant type, and location conditions.

Dry Scrubbers

Dry scrubbers are designed to remove harmful gases and particulates from exhaust streams without using water as the primary scrubbing medium. They can be useful for controlling acidic gases and high-temperature exhaust streams.

The Delhi range includes FAEK-1, FAEK-2, FAEK-3, and FAEK-4 models. A single unit can handle up to 12,000 CFM, while multiple systems can offer a maximum capacity of up to 60,000 CFM, depending on the system configuration.

Wet Scrubbers

Wet scrubbers use liquid, usually through spray headers and nozzles, to capture and neutralize contaminants within the exhaust stream. They are especially useful where fumes, grease, oil, or other pollutants need to be treated in a liquid-based scrubbing process.

The current Delhi product page describes a wet scrubber arrangement with a double-bank GI spray header, brass/PVC spray nozzles, DIDW centrifugal blowers, TEFC 3-phase motors, pumps, and a dedicated sump arrangement.

Key Features of Dry/Wet Scrubbers

Industrial Dry/Wet Scrubbers can be configured according to different pollution-control requirements. Important features include:

  • Dry and wet scrubbing configurations
  • Different models for different airflow requirements
  • Dry scrubber capacity up to 12,000 CFM per unit
  • Multi-unit capacity up to 60,000 CFM
  • Spray headers and nozzles for wet scrubbing
  • DIDW centrifugal blowers
  • TEFC three-phase motors
  • Heavy-gauge base frame
  • Aluminium profile body options
  • PUF-insulated double-skin casing options
  • Stainless steel and GI sump configurations
  • Adjustable motor mounting arrangement
  • Suitable for commercial and industrial exhaust treatment

The wet scrubber construction includes an extruded aluminium profile frame, heavy-gauge base frame with cast aluminium corners, and double-skin panels with PUF insulation or single-skin GI construction.

Technical Specifications

Scrubber TypesDry Scrubber & Wet Scrubber
Dry Scrubber ModelsFAEK-1, FAEK-2, FAEK-3, FAEK-4
Dry Scrubber CapacityUp to 12,000 CFM per unit
Maximum Multi-Unit CapacityUp to 60,000 CFM
Wet SectionDouble Bank GI Spray Header
Spray NozzlesBrass / PVC
BlowersDIDW Centrifugal Blowers
MotorsTEFC Three-Phase Motors
FrameExtruded Aluminium Profile
CasingDouble-Skin PUF Panels / Single-Skin GI
SumpSS304 / GI with FRP Tank
PumpsMonoblock Pumps
Motor StandAdjustable Motor Mounting Fixture

The final configuration is chosen according to the exhaust characteristics, required airflow, static pressure, pollutant type, and site conditions.

Applications of Dry Scrubbers

Dry Scrubbers are used in various industrial processes where gases and particulates need to be controlled. Current applications listed for the Delhi range include:

  • Asphalt processing
  • Pharmaceutical manufacturing
  • Landfills and biogas
  • Coating processes
  • Textile processing
  • Tar removal
  • Curing ovens
  • Vinyl manufacturing
  • Oil and gas applications
  • Acid mist control
  • Fertilizer manufacturing
  • Wastewater treatment
  • Steel processing
  • Electronics production
  • Food processing
  • Cocoa processing

Dry scrubbers can be particularly useful where exhaust streams contain acidic gases, particulates, or other pollutants that require treatment without a traditional wet scrubbing process.

Applications of Wet Scrubbers

Wet scrubbers are appropriate for applications where contaminants may be captured or neutralized through contact with a liquid solution.

They can be used for kitchen exhaust treatment, where cooking fumes containing oil and grease are drawn through hoods and treated using water spray. They can also be used for chemical, pharmaceutical, and process exhaust treatment where the system requires liquid-based pollutant removal.

For commercial kitchens, industrial plants, and other exhaust applications, the wet scrubber may be designed around the specified airflow and pollutant characteristics.

Benefits of Dry/Wet Scrubbers

One of the primary advantages of scrubber systems is their ability to treat contaminated exhaust before it is discharged. The choice of dry or wet technology allows the system to be matched to different pollutant types and operating conditions.

Dry scrubbers can be appropriate for acidic and high-temperature exhaust streams, while wet scrubbers provide liquid-based treatment for fumes and contaminants that may be captured through water or another scrubbing liquid.

Proper sizing can also help maintain the required airflow while also helping to effectively remove pollutants. For this reason, airflow, static pressure, exhaust temperature, and pollutant characteristics should be considered during selection.

Dry/Wet Scrubbers Suppliers in Delhi

Choosing suitable Dry/Wet Scrubbers Suppliers in Delhi is crucial because scrubber performance depends on correct sizing and configuration. A system needs to be selected according to the actual exhaust conditions rather than only the physical size of the system.

The current Delhi product data state that scrubbers are selected according to required airflow, static pressure, and site conditions. Technical sizing and information may be provided before ordering, and finished units may be dispatched to Delhi and other parts of India.

Dry/Wet Scrubbers Manufacturer in India

A reliable Dry/Wet Scrubbers Manufacturer in India should be able to provide systems for different commercial and industrial exhaust treatment requirements. The selection between dry and wet technology depends on the type of pollutants, exhaust temperature, airflow, and treatment requirements.

The production facility associated with the Delhi range is located at Neemrana, Rajasthan, along the Delhi-Jaipur Highway. This location supports supply to Delhi NCR projects and other places across India.

How to Choose the Right Scrubber?

Before selecting a scrubber system, consider the following factors:

  • Pollutant type: Identify the gases, fumes, debris, oil, grease, or other contaminants present within the exhaust.
  • Airflow: Determine the CFM specified for the exhaust.
  • Static pressure: Check the pressure requirements of the whole ventilation system.
  • Temperature: High-temperature exhaust may require a suitable dry scrubber configuration.
  • Scrubbing method: Determine if a dry or wet treatment is more suitable for the application.
  • Material: Consider the chemical characteristics of the exhaust when selecting construction materials.
  • Maintenance: Allow suitable access for cleaning, inspection, pump servicing, and other maintenance activities.

Proper selection helps the scrubber work correctly with the complete exhaust and pollution-control system.

FAQs

What are dry and wet scrubbers?

Dry and wet scrubbers are used to remove or control pollutants from exhaust gases and air streams. They are used in industrial processes, pharmaceutical applications, chemical exhaust systems, kitchens, and other commercial and industrial environments.

What is the capacity of the dry scrubbers?

The listed dry scrubber models can handle up to 12,000 CFM for a single unit, while multiple units can offer a maximum capacity of up to 60,000 CFM.

What dry scrubber models are available?

The current Delhi page lists FAEK-1, FAEK-2, FAEK-3, and FAEK-4 dry scrubber models.

What components are used in wet scrubbers?

The wet scrubber configuration includes a GI spray header, brass/PVC spray nozzles, DIDW centrifugal blowers, TEFC 3-phase motors, adjustable motor mounting, monoblock pumps, and a sump with SS304/GI and FRP tank options.

Where can dry scrubbers be used?

Dry scrubbers may be used in asphalt processing, pharmaceuticals, textile processing, oil and gas, fertilizer production, metal processing, food processing, wastewater treatment, electronics, and various other commercial applications.

Learn More

Conclusion

Dry/Wet Scrubbers Manufacturers in Delhi offer pollution-control solutions for commercial and industrial exhaust treatment. Dry scrubbers can be used for gases, particulates, acidic exhaust, and high-temperature applications, while wet scrubbers use liquid-based treatment for fumes and other contaminants.

With different models, airflow capacities, spray systems, blowers, motors, pumps, and construction options, scrubber systems can be selected according to the requirements of each project. FanAir India Pvt. Ltd. offers dry and wet scrubbers for Delhi NCR and other locations across India, with technical sizing based on airflow, static pressure, application, and site conditions.

Contact Us

Serving Delhi NCR

Fan Air India Pvt. Ltd. manufactures dry and wet scrubbers that remove pollutants from exhaust gases. For customers in Delhi, our Dry & Wet Scrubbers are commonly used for chemical, pharmaceutical, process and kitchen exhaust treatment.

Delhi NCR has a dense mix of commercial complexes, malls, hospitals, metro-linked developments and data centres, as well as industrial areas such as Okhla, Narela, Bawana and nearby Gurugram, Noida and Faridabad. Our manufacturing plant at Neemrana sits on the Delhi-Jaipur highway (NH-48), which keeps NCR projects close to the factory.

Every unit is built at our factory in Neemrana, Rajasthan and selected to suit the required airflow, static pressure and site conditions of your project. Our team can help with sizing and technical data before you order, and we dispatch finished equipment to sites across Delhi and the rest of India.

To get a quotation for Dry & Wet Scrubbers in Delhi, share your airflow, pressure and application details through our contact page, call +91-9811347199 or email saurabh.joshi@fanair.in.

Other Fan Air products in Delhi

Dry & Wet Scrubbers in other locations