+91-9811347199 saurabh.joshi@fanair.in
/// ESTD 2016

Dry/Wet Scrubbers in Ahmedabad

Scrubbers Manufacturers in Ahmedabad

Effective Pollution Control for Industrial Exhaust Systems

Dry and wet scrubbers are pollution control systems designed to treat contaminated exhaust air and remove harmful gases, fumes, particulates, oil, grease, and other pollutants. They are used throughout industries where exhaust treatment and controlled air quality are critical.

Dry/Wet Scrubbers Manufacturers in Ahmedabad provide pollution control solutions for commercial, industrial, process, and kitchen exhaust applications. Dry scrubbers use absorbent materials or chemical reactions to treat exhaust gases without water, while wet scrubbers use liquid solutions and water jets to capture and neutralize contaminants.

Contact Us
Dry Scrubber Manufacturers in Rajasthan

Dry Scrubber

A Dry scrubber is designed to extract harmful gases and particulates from exhaust streams. It is a type of pollution control equipment. Dry scrubber are primarily used to abate acidic gases, like those associated with acid rain. This is one of the most common pieces of equipment found in manufacturing plants, because of its ability to handle high temperature, highly acidic exhaust streams.

Model no.
FAEK-1,2,3,4
Capacity
Upto 12000 CFM (Single Unit)
Max Capacity
Upto 60000 CFM (Multi Unit)
Applications
Asphalt Processing, Pharmaceuticals, Landfills And Biogas, Coaters, Textile Processing, Tar Removal, Curing Ovens, Vinyl Manufacturing, Oil And Gas, Acid Mist Control, Fertilizer Manufacturing, Wastewater Treatment, Steel Processing, Electronics, Food Processing, Cocoa Processing
Wet Scrubber Manufacturers in Rajasthan

Wet Scrubber

As the name suggest kitchen scrubber is used to scrub fumes from the cooking process. It draws the fumes from the kitchen through the hoods. These fumes will be scrubbed by high water jets due to which all the contaminants such as oil, grease etc. are trapped and clean air will be exhausted to the environment Fanair wet scrubber is highly efficient, very low pressure drop and hence maximum scrubbing efficiency.

Frame
Extruded Aluminium Profile
Base
Heavy Gauge Base Frame With Cast Al Corners
Casing
23+2 Mm Thick, Double Skin Panels Made Of 0.6 Mm Sheets With Poly Urethane Foam (PUF Of Density 38+2 Kg/ Cu. M) Injected Between Two Skins Or Single Skin In 1.6/1.8 Mm Gl Sheet.
Wet Section
Double Bank Gl Spray Header With Brass/PVC Spray Nozzles.
Blowers
DIDW Centrifugal Blowers, Common Rail Base For Blower Motor Assembly On Vibration Isolator Pads
Motors
TEFC Type, Three Phase Motor Of Standard Make.
Motor Stand
Adjustable Motor Mounting Fixture.
Pulleys
Adjustable Taper Bush Pulleys
Pumps
Monoblock Pumps Of Standard Make.
Sump
SS 304/ Gl With FRP Tank With Socket Connections For Water In Overflow And Drain Complete With Y Strainer, Ball Cock Etc.

What Are Dry and Wet Scrubbers?

Scrubbers are designed to treat polluted exhaust before it is released from an industrial or commercial process. The appropriate technology depends on the type of pollutant, exhaust temperature, airflow, pressure, and operating conditions.

Dry scrubbers are especially suitable for exhaust streams containing acidic gases and particulates. They can handle high-temperature and highly acidic exhaust streams, making them useful for various production processes. Wet scrubbers use liquid-based treatment to capture contaminants from exhaust air and may be used for fumes, oil, grease, and other pollutants.

Dry Scrubbers

Dry scrubbers are a type of industrial pollution control system designed to extract harmful gases and particulates from exhaust streams. They use absorbent materials or chemical reactions rather than water to treat contaminated air.

The current range includes FAEK-1, FAEK-2, FAEK-3, and FAEK-4 models. A single unit can handle capacity up to 12,000 CFM, while multiple units can be configured for a maximum capacity of up to 60,000 CFM.

Dry scrubbers are especially useful for processes that generate acidic or high-temperature exhaust. Their applications include pharmaceutical manufacturing, textile processing, asphalt processing, oil and gas, fertilizer manufacturing, metal processing, and other industrial processes.

Wet Scrubbers

Wet scrubbers use liquid-based treatment to remove contaminants from exhaust air. In kitchen and process exhaust applications, contaminated fumes are drawn through hoods and treated using high-pressure water jets, which help trap contaminants such as oil and grease.

The wet scrubber construction includes a double-bank GI spray header with brass/PVC spray nozzles. DIDW centrifugal blowers, TEFC three-phase motors, adjustable motor mounting fixtures, monoblock pumps, and an SS304/GI sump with an FRP tank are also part of the listed construction.

The system is designed for efficient scrubbing with low pressure drop, making it suitable for applications where continuous exhaust treatment is required.

Key Features of Dry/Wet Scrubbers

Dry and wet scrubbers offer different configurations for different pollution-control requirements. Important features include:

  • Dry and wet scrubbing options
  • Dry scrubber models FAEK-1, FAEK-2, FAEK-3 and FAEK-4
  • Single dry scrubber capacity up to 12,000 CFM
  • Multi-unit dry scrubber capacity up to 60,000 CFM
  • Absorbent or chemical treatment for dry scrubbing
  • Liquid-based treatment for wet scrubbing
  • Double-bank GI spray header
  • Brass/PVC spray nozzles
  • DIDW centrifugal blowers
  • TEFC three-phase motors
  • Adjustable motor mounting fixture
  • Adjustable taper bush pulleys
  • Monoblock pumps
  • SS304/GI sump with FRP tank
  • Extruded aluminium profile body
  • Double-skin PUF panel or single-skin GI casing options

Technical Specifications

ParameterDry ScrubberWet Scrubber
ModelsFAEK-1, 2, 3, 4Application-specific
Single Unit CapacityUp to 12,000 CFMApplication-specific
Maximum Multi-Unit CapacityUp to 60,000 CFMApplication-specific
Scrubbing MethodAbsorbent materials / chemical reactionLiquid and water-jet scrubbing
FrameApplication-specificExtruded Aluminium Profile
BaseApplication-specificHeavy Gauge Base Frame with Cast Aluminium Corners
CasingApplication-specificDouble-Skin PUF Panels / Single-Skin GI
Spray Header—Double Bank GI
Spray Nozzles—Brass/PVC
Blowers—DIDW Centrifugal Blowers
Motors—TEFC Three-Phase Motor
Pumps—Monoblock Pumps
Sump—SS304/GI with FRP Tank

The final scrubber configuration needs to be selected according to airflow, static pressure, pollutant characteristics, exhaust temperature, application, and site conditions.

Applications of Dry/Wet Scrubbers

Dry/Wet Scrubbers in Ahmedabad can be used across a wide variety of commercial and industrial applications. The current product range covers:

  • Asphalt processing
  • Pharmaceutical production
  • Landfills and biogas
  • Coating processes
  • Textile processing
  • Tar removal
  • Curing ovens
  • Vinyl manufacturing
  • Oil and gas
  • Acid mist control
  • Fertilizer production
  • Wastewater treatment
  • Steel processing
  • Electronics manufacturing
  • Food processing
  • Cocoa processing
  • Chemical exhaust treatment
  • Kitchen exhaust treatment

Ahmedabad and the wider Gujarat industrial belt, including Vatva, Naroda, Changodar, and Sanand, has textile, chemical, pharmaceutical, engineering, and automotive industries. Many of these facilities run continuous processes where reliable exhaust treatment and air movement are important.

Benefits of Dry/Wet Scrubbers

Effective Pollutant Removal

Scrubbers are designed to treat contaminated exhaust before it is discharged, helping control gases, fumes, particulates, and other pollutants.

Dry Treatment Option

Dry scrubbers offer a water-free method of treating exhaust gases and particulates, making them appropriate for applications involving acidic and high-temperature exhaust streams.

Wet Scrubbing

Wet scrubbers use water or other liquid solutions to capture contaminants. This makes them suitable for fumes, oil, grease, and other pollutants that may be trapped through liquid contact.

Flexible Applications

The available configurations can be used across pharmaceutical, textile, chemical, food, metal, oil and gas, wastewater, and other industrial processes.

Application-Specific Construction

Wet scrubbers can include different casing, blower, motor, pump, spray, and sump arrangements according to the requirements of the system.

Dry/Wet Scrubbers Suppliers in Ahmedabad

When choosing Dry/Wet Scrubbers Suppliers in Ahmedabad, complete data about the exhaust application should be provided before selecting the equipment. Airflow, static pressure, pollutant type, concentration, exhaust temperature, and operating conditions can all affect an appropriate scrubber configuration.

For Ahmedabad projects, scrubbers can be required for chemical and pharmaceutical plants, textile facilities, process industries, production units, and kitchen exhaust systems. The system should therefore be selected according to the actual exhaust characteristics instead of using the same configuration for every application.

Dry/Wet Scrubbers Manufacturer in India

For projects looking for a Dry/Wet Scrubbers Manufacturer in India, technical sizing is an important part of the equipment selection process. The scrubber must be matched with the specified airflow, static pressure, pollutant characteristics, and operating environment.

The manufacturing facility is located in Neemrana, Rajasthan. Each unit is selected according to the required airflow, static pressure, and site conditions. Technical sizing and product data can be reviewed before ordering, with completed equipment dispatched to Ahmedabad and other places throughout India.

How to Choose the Right Scrubber

Before selecting a dry or wet scrubber, consider the following factors:

  • Identify the Pollutants: Determine whether the exhaust carries gases, fumes, dust, oil, grease, acid mist, or other contaminants.
  • Check Airflow: Establish the specified CFM for the exhaust system.
  • Determine Static Pressure: Consider resistance from ducts, hoods, filters, dampers, and other components.
  • Select Scrubbing Method: Choose dry or wet technology according to the pollutant and process.
  • Check Exhaust Temperature: High-temperature applications may also require an appropriate scrubber configuration.
  • Consider Materials: Select casing, sump, spray nozzles, and other components according to the operating environment.
  • Review Maintenance: Ensure pumps, blowers, spray systems, and other components may be accessed for inspection and servicing.
  • Consider Site Conditions: Review available space, installation requirements, and operating conditions before final selection.

Frequently Asked Questions

What is a dry scrubber?

A dry scrubber is pollution control equipment designed to extract harmful gases and particulates from exhaust streams using absorbent materials or chemical reactions without water.

What is a wet scrubber?

A wet scrubber uses liquid-based treatment to capture contaminants from exhaust air. Water jets and spray nozzles can help trap pollutants such as fumes, oil, and grease.

What is the capacity of the dry scrubbers?

The listed dry scrubber models can handle up to 12,000 CFM for a single unit and up to 60,000 CFM using multiple units.

Where are dry scrubbers used?

Dry scrubbers are used in asphalt processing, pharmaceuticals, textile processing, oil and gas, fertilizer production, metal processing, electronics, food processing, wastewater treatment, and various other applications.

What components are included in wet scrubbers?

The listed wet scrubber construction includes an aluminium profile body, GI spray header, brass/PVC spray nozzles, DIDW centrifugal blowers, TEFC 3-phase motors, monoblock pumps, and an SS304/GI sump with FRP tank.

Learn More

Conclusion

Dry and wet scrubbers provide practical solutions for controlling pollutants from commercial, process, and industrial exhaust systems. Dry scrubbers are suitable for applications involving gases and particulates, such as acidic and high-temperature exhaust, while wet scrubbers use liquid-based treatment for fumes, oil, grease, and other contaminants.

FanAir India Pvt. Ltd. offers dry and wet scrubber solutions for Ahmedabad and other locations across India, with selection based on airflow, static pressure, pollutant characteristics, application, and site conditions. Technical requirements can be reviewed before ordering to identify a suitable scrubber configuration for the project.

Contact Us

Serving Ahmedabad

Fan Air India Pvt. Ltd. manufactures dry and wet scrubbers that remove pollutants from exhaust gases. For customers in Ahmedabad, our Dry & Wet Scrubbers are commonly used for chemical, pharmaceutical, process and kitchen exhaust treatment.

Ahmedabad and the wider Gujarat industrial belt, including the GIDC estates around Vatva, Naroda, Changodar and Sanand, is home to textile mills, chemical and pharmaceutical plants, engineering units and a fast-growing automobile cluster. Many of these sites run continuous processes in a hot, dry climate, where reliable air movement matters for both worker comfort and process quality.

Every unit is built at our factory in Neemrana, Rajasthan and selected to suit the required airflow, static pressure and site conditions of your project. Our team can help with sizing and technical data before you order, and we dispatch finished equipment to sites across Ahmedabad and the rest of India.

To get a quotation for Dry & Wet Scrubbers in Ahmedabad, share your airflow, pressure and application details through our contact page, call +91-9811347199 or email saurabh.joshi@fanair.in.

Other Fan Air products in Ahmedabad

Dry & Wet Scrubbers in other locations