+91-9811347199 saurabh.joshi@fanair.in
/// ESTD 2016

Dry/Wet Scrubbers in Chennai

Scrubbers Manufacturers in Chennai

Efficient Pollution Control for Industrial and Commercial Applications

Dry and wet scrubbers are pollution-control systems designed to remove harmful pollutants, gases, fumes, and particulates from exhaust streams. Dry scrubbers use absorbent materials or chemical reactions without water, while wet scrubbers use liquid solutions to capture and neutralize contaminants. These systems are used across industrial and commercial environments where exhaust treatment and cleaner air are essential.

As Dry/Wet Scrubbers in Chennai, these systems can be selected for different exhaust-treatment requirements, such as chemical, pharmaceutical, process, and kitchen exhaust applications. The selection depends on the type of pollutant, airflow, pressure, operating conditions, and site requirements.

Contact Us
Dry Scrubber Manufacturers in Rajasthan

Dry Scrubber

A Dry scrubber is designed to extract harmful gases and particulates from exhaust streams. It is a type of pollution control equipment. Dry scrubber are primarily used to abate acidic gases, like those associated with acid rain. This is one of the most common pieces of equipment found in manufacturing plants, because of its ability to handle high temperature, highly acidic exhaust streams.

Model no.
FAEK-1,2,3,4
Capacity
Upto 12000 CFM (Single Unit)
Max Capacity
Upto 60000 CFM (Multi Unit)
Applications
Asphalt Processing, Pharmaceuticals, Landfills And Biogas, Coaters, Textile Processing, Tar Removal, Curing Ovens, Vinyl Manufacturing, Oil And Gas, Acid Mist Control, Fertilizer Manufacturing, Wastewater Treatment, Steel Processing, Electronics, Food Processing, Cocoa Processing
Wet Scrubber Manufacturers in Rajasthan

Wet Scrubber

As the name suggest kitchen scrubber is used to scrub fumes from the cooking process. It draws the fumes from the kitchen through the hoods. These fumes will be scrubbed by high water jets due to which all the contaminants such as oil, grease etc. are trapped and clean air will be exhausted to the environment Fanair wet scrubber is highly efficient, very low pressure drop and hence maximum scrubbing efficiency.

Frame
Extruded Aluminium Profile
Base
Heavy Gauge Base Frame With Cast Al Corners
Casing
23+2 Mm Thick, Double Skin Panels Made Of 0.6 Mm Sheets With Poly Urethane Foam (PUF Of Density 38+2 Kg/ Cu. M) Injected Between Two Skins Or Single Skin In 1.6/1.8 Mm Gl Sheet.
Wet Section
Double Bank Gl Spray Header With Brass/PVC Spray Nozzles.
Blowers
DIDW Centrifugal Blowers, Common Rail Base For Blower Motor Assembly On Vibration Isolator Pads
Motors
TEFC Type, Three Phase Motor Of Standard Make.
Motor Stand
Adjustable Motor Mounting Fixture.
Pulleys
Adjustable Taper Bush Pulleys
Pumps
Monoblock Pumps Of Standard Make.
Sump
SS 304/ Gl With FRP Tank With Socket Connections For Water In Overflow And Drain Complete With Y Strainer, Ball Cock Etc.

Dry and Wet Scrubbers for Chennai Projects

Dry scrubbers are designed to extract harmful gases and particulates from exhaust streams. They are especially appropriate for acidic gases and applications involving high-temperature and highly acidic exhaust streams. The available dry scrubber range includes FAEK-1, FAEK-2, FAEK-3, and FAEK-4 models. A single unit can handle up to 12,000 CFM, while multi-unit arrangements can achieve up to 60,000 CFM.

For projects requiring Dry/Wet Scrubbers Suppliers in Chennai, an appropriate scrubber may be selected according to the exhaust characteristics and required treatment capacity. Application information and airflow data are crucial for identifying the proper configuration.

Wet scrubbers use water jets to capture contaminants from fumes. The current product page describes their use for kitchen fumes, where contaminants such as oil and grease are trapped by high-pressure water jets before cleaner air is exhausted. The wet scrubber is designed for high scrubbing performance with very low pressure drop.

Types of Scrubbers

Dry Scrubbers

Dry scrubbers are pollution-control systems used to remove harmful gases and particulates from exhaust streams. They may be used for acidic gas control and high-temperature exhaust applications where a water-based process is not preferred.

The available models are FAEK-1, FAEK-2, FAEK-3, and FAEK-4. Capacity is up to 12,000 CFM for a single unit and up to 60,000 CFM for a multi-unit arrangement.

For customers looking for Dry Scrubber Manufacturers in Chennai, these systems can be considered for industrial processes involving acidic gases, particulates, and demanding exhaust conditions.

Wet Scrubbers

Wet scrubbers use liquid sprays to capture contaminants from exhaust fumes. In kitchen applications, fumes are drawn through hoods and treated using high-pressure water jets that trap oil, grease, and other contaminants.

The wet scrubber construction includes an extruded aluminium profile frame, heavy-gauge base frame with cast aluminium corners, double-skin or single-skin casing options, spray headers, brass/PVC spray nozzles, DIDW centrifugal blowers, TEFC three-phase motors, pumps, and an SS304/GI sump with an FRP tank.

For Wet Scrubber Manufacturers in Chennai, this construction provides a complete system for appropriate exhaust and fume-treatment applications.

Technical Specifications

ProductDry & Wet Scrubbers
Dry Scrubber ModelsFAEK-1, FAEK-2, FAEK-3, FAEK-4
Dry Scrubber CapacityUp to 12,000 CFM per single unit
Maximum Dry Scrubber CapacityUp to 60,000 CFM with multi-unit arrangement
Dry Scrubber FunctionRemoval of harmful gases and particulates
Dry Scrubber ApplicationsAcidic gases, high-temperature exhaust and industrial processes
Wet Scrubber FunctionFume and contaminant removal using liquid sprays
Wet FrameExtruded Aluminium Profile
Wet BaseHeavy Gauge Base Frame with Cast Aluminium Corners
Wet CasingDouble-Skin / Single-Skin Construction
Wet SectionDouble Bank GI Spray Header
Spray NozzlesBrass / PVC
BlowersDIDW Centrifugal Blowers
MotorsTEFC, Three-Phase
PumpsMonoblock Pumps
SumpSS304 / GI with FRP Tank

The listed dry scrubber capacity is up to 12,000 CFM for one unit and up to 60,000 CFM for a multi-unit system. The wet scrubber includes dedicated spray, blower, motor, pump, and sump components.

Applications of Dry and Wet Scrubbers

Scrubbers may be used in a wide variety of industrial processes where exhaust gases, fumes, particulates, or contaminants need to be treated.

Dry scrubber applications listed on the product page include:

  • Asphalt processing
  • Pharmaceuticals
  • Landfills and biogas
  • Coating processes
  • Textile processing
  • Tar removal
  • Curing ovens
  • Vinyl manufacturing
  • Oil and gas
  • Acid mist control
  • Fertilizer production
  • Wastewater treatment
  • Steel processing
  • Electronics
  • Food processing
  • Cocoa processing

For Industrial Scrubber Manufacturers in Chennai, these applications cover various sectors in which exhaust treatment and pollution-control systems are required.

Wet scrubbers are especially suitable for kitchen and process fumes where contaminants such as oil and grease need to be captured through water-based scrubbing.

Key Benefits

Pollution Control

Dry scrubbers help remove harmful gases and particulates from exhaust streams, making them suitable for industrial emission-control applications.

Acidic Gas Treatment

Dry scrubbers can be used for acidic gases and high-temperature, highly acidic exhaust streams.

High Scrubbing Efficiency

Wet scrubbers use water sprays to trap contaminants and are designed for high scrubbing performance with very low pressure drop.

Multiple Capacity Options

Dry scrubbers can be configured for single-unit capacities up to 12,000 CFM or multi-unit capacities up to 60,000 CFM.

Application Flexibility

The available systems cover pharmaceutical, chemical, food, textile, metal, oil and gas, kitchen, and other exhaust-treatment requirements.

Choosing the Right Scrubber

The right scrubber should be selected according to the characteristics of the exhaust stream and the requirements of the entire pollution-control system.

Important factors include:

  • Pollutant Type: Identify whether the exhaust carries gases, particulates, oil, grease, acid mist, or other contaminants.
  • Airflow: Determine the required CFM for the exhaust stream.
  • Temperature: Consider the operating temperature of the exhaust.
  • Scrubber Type: Select dry or wet scrubbing according to the process requirements.
  • Pressure: Evaluate the system pressure and allowable pressure drop.
  • Application: Consider the specific industrial or commercial process.
  • Material Requirement: Select suitable construction materials according to the operating environment.
  • Installation Conditions: Review available space, connections, maintenance access, and site conditions.

For Dry/Wet Scrubbers Suppliers in Chennai, sharing airflow, pressure, pollutant type, application, and site details can help with suitable technical selection.

Manufacturing and Supply for Chennai

The scrubbers are manufactured at the factory in Neemrana, Rajasthan. Each unit is selected according to the required airflow, static pressure, application, and site conditions. Technical support for sizing and relevant technical details is available before ordering, and completed equipment can be dispatched to Chennai and other locations across India.

For customers looking for Dry & Wet Scrubbers Manufacturer in Chennai, project-specific requirements can be evaluated before finalizing the configuration.

Scrubbers for Chennai's Industrial Environment

Chennai has major automotive and manufacturing clusters around Sriperumbudur, Oragadam, Ambattur, and Guindy. The city also has pharmaceutical, industrial, healthcare, IT, and port-related facilities. These environments can require reliable exhaust treatment for process emissions, fumes, and other airborne contaminants.

For Industrial Scrubber Manufacturers in Chennai, the selection process should consider the process generating the exhaust, pollutant characteristics, airflow, temperature, pressure, and required treatment process.

The city's hot and humid coastal conditions also make suitable equipment construction and proper installation important considerations for long-term operation.

Frequently Asked Questions

What is a dry scrubber?

A dry scrubber is pollution-control equipment designed to remove harmful gases and particulates from exhaust streams using absorbent materials or chemical reactions without water.

What is the capacity of the dry scrubber?

The listed capacity is up to 12,000 CFM for a single unit and up to 60,000 CFM for a multi-unit arrangement.

What is a wet scrubber used for?

Wet scrubbers use liquid sprays to capture contaminants from fumes. The current product page specifically describes their use for kitchen fumes containing contaminants such as oil and grease.

Which industries use dry scrubbers?

Dry scrubbers are listed for applications such as pharmaceuticals, asphalt processing, textile processing, oil and gas, fertilizer production, metal processing, electronics, food processing, and several other industrial processes.

What data is needed for scrubber selection?

Airflow, pressure, pollutant type, application, operating temperature, and location conditions are critical information for identifying an appropriate scrubber configuration.

Learn More

Conclusion

Dry and wet scrubbers offer pollution-control solutions for commercial and industrial exhaust-treatment requirements. Dry scrubbers can handle harmful gases, particulates, acidic gases, and demanding exhaust streams, while wet scrubbers use liquid sprays to capture contaminants such as oil and grease. With multiple dry scrubber models and capacities up to 60,000 CFM in multi-unit arrangements, the range can support different applications.

FanAir India Pvt. Ltd. manufactures these air-management and pollution-control solutions at its Neemrana facility and supports project-specific selection based on airflow, pressure, application, and site conditions. Finished equipment can be dispatched to Chennai and other places across India.

Contact Us

Serving Chennai

Fan Air India Pvt. Ltd. manufactures dry and wet scrubbers that remove pollutants from exhaust gases. For customers in Chennai, our Dry & Wet Scrubbers are commonly used for chemical, pharmaceutical, process and kitchen exhaust treatment.

Chennai is one of India's largest automotive and manufacturing centres, with major clusters around Sriperumbudur, Oragadam, Ambattur and Guindy, along with hospitals, IT campuses and port-linked warehousing. Its hot, humid coastal climate calls for well-protected fans and steady ventilation in plants, basements and plant rooms.

Every unit is built at our factory in Neemrana, Rajasthan and selected to suit the required airflow, static pressure and site conditions of your project. Our team can help with sizing and technical data before you order, and we dispatch finished equipment to sites across Chennai and the rest of India.

To get a quotation for Dry & Wet Scrubbers in Chennai, share your airflow, pressure and application details through our contact page, call +91-9811347199 or email saurabh.joshi@fanair.in.

Other Fan Air products in Chennai

Dry & Wet Scrubbers in other locations