+91-9811347199 saurabh.joshi@fanair.in
/// ESTD 2016

Dry/Wet Scrubbers in Jammu and Kashmir

Scrubbers Manufacturers in Jammu and Kashmir

Efficient Pollution Control for Industrial Applications

Dry and wet scrubbers are pollution control systems used to remove unwanted gases, fumes, particles, and other pollutants from exhaust air. They are used in many commercial and industrial applications in which cleaner exhaust air and proper air treatment are required.

Dry/Wet Scrubbers Manufacturer in Jammu and Kashmir solutions can be selected according to the type of pollutant, airflow, process conditions, and application. Dry and wet scrubbers work in different ways, making it vital to choose the proper system for each project.

Contact Us
Dry Scrubber Manufacturers in Rajasthan

Dry Scrubber

A Dry scrubber is designed to extract harmful gases and particulates from exhaust streams. It is a type of pollution control equipment. Dry scrubber are primarily used to abate acidic gases, like those associated with acid rain. This is one of the most common pieces of equipment found in manufacturing plants, because of its ability to handle high temperature, highly acidic exhaust streams.

Model no.
FAEK-1,2,3,4
Capacity
Upto 12000 CFM (Single Unit)
Max Capacity
Upto 60000 CFM (Multi Unit)
Applications
Asphalt Processing, Pharmaceuticals, Landfills And Biogas, Coaters, Textile Processing, Tar Removal, Curing Ovens, Vinyl Manufacturing, Oil And Gas, Acid Mist Control, Fertilizer Manufacturing, Wastewater Treatment, Steel Processing, Electronics, Food Processing, Cocoa Processing
Wet Scrubber Manufacturers in Rajasthan

Wet Scrubber

As the name suggest kitchen scrubber is used to scrub fumes from the cooking process. It draws the fumes from the kitchen through the hoods. These fumes will be scrubbed by high water jets due to which all the contaminants such as oil, grease etc. are trapped and clean air will be exhausted to the environment Fanair wet scrubber is highly efficient, very low pressure drop and hence maximum scrubbing efficiency.

Frame
Extruded Aluminium Profile
Base
Heavy Gauge Base Frame With Cast Al Corners
Casing
23+2 Mm Thick, Double Skin Panels Made Of 0.6 Mm Sheets With Poly Urethane Foam (PUF Of Density 38+2 Kg/ Cu. M) Injected Between Two Skins Or Single Skin In 1.6/1.8 Mm Gl Sheet.
Wet Section
Double Bank Gl Spray Header With Brass/PVC Spray Nozzles.
Blowers
DIDW Centrifugal Blowers, Common Rail Base For Blower Motor Assembly On Vibration Isolator Pads
Motors
TEFC Type, Three Phase Motor Of Standard Make.
Motor Stand
Adjustable Motor Mounting Fixture.
Pulleys
Adjustable Taper Bush Pulleys
Pumps
Monoblock Pumps Of Standard Make.
Sump
SS 304/ Gl With FRP Tank With Socket Connections For Water In Overflow And Drain Complete With Y Strainer, Ball Cock Etc.

What Are Dry/Wet Scrubbers?

A scrubber is a system used to clean polluted air or exhaust gases before they are released from an industrial system. It can help control fumes, gases, dust, oil, grease, and other unwanted contaminants.

Dry/Wet Scrubbers in Jammu and Kashmir can be used for specific industrial processes, such as manufacturing, pharmaceuticals, food processing, textile processing, and wastewater treatment.

Dry Scrubbers

A Dry Scrubber removes pollutants from exhaust air without using water as the primary cleaning medium. It can use absorbent materials or other treatment methods to capture unwanted gases and debris.

Dry scrubbers are useful for processes that produce acidic gases, fumes, and other pollutants. They also are suitable for applications where the exhaust stream may have high temperatures.

Dry Scrubber Models

The available dry scrubber models are FAEK-1, FAEK-2, FAEK-3, and FAEK-4.

A single unit can handle up to 12,000 CFM, while multiple units may be used for a maximum capacity of up to 60,000 CFM.

Wet Scrubbers

A Wet Scrubber uses liquid, typically water, to capture and remove pollutants from an air or exhaust stream. The polluted air comes into contact with water spray, allowing contaminants to be trapped within the liquid.

FanAir's wet scrubber design uses spray headers and brass/PVC spray nozzles. It also includes DIDW centrifugal blowers, TEFC 3-phase motors, pumps, and a sump system.

Key Features of Dry/Wet Scrubbers

Effective Pollutant Removal

Scrubbers are designed to reduce unwanted pollutants from exhaust air. The appropriate scrubber type depends on the type of contaminant and the process producing it.

Different Capacity Options

Dry scrubbers are available for different airflow requirements. A single unit can handle up to 12,000 CFM, while multiple systems may be arranged for applications requiring up to 60,000 CFM.

Robust Construction

Wet scrubbers use a heavy-gauge base frame with aluminium corners. The casing can use double-skin panels with PUF insulation or a single-skin galvanized sheet construction.

Suitable Blower Arrangement

Wet scrubber systems use DIDW centrifugal blowers with the blower and motor assembly mounted on a common rail base with vibration isolator pads. This supports stable operation of the system.

Technical Specifications

ProductDry/Wet Scrubbers
Dry Scrubber ModelsFAEK-1, 2, 3, 4
Dry Scrubber CapacityUp to 12,000 CFM per unit
Maximum Multi-Unit CapacityUp to 60,000 CFM
Wet Scrubber FrameExtruded Aluminium Profile
Wet SectionDouble Bank GI Spray Header
Spray NozzlesBrass / PVC
BlowersDIDW Centrifugal Blowers
MotorsTEFC Three-Phase Motors
SumpSS304 / GI with FRP Tank

The final scrubber should be selected according to the airflow, pollutant type, process conditions, temperature, and required treatment process.

Applications of Dry/Wet Scrubbers

Dry/Wet Scrubbers in Jammu and Kashmir may be used across many industrial sectors.

Pharmaceutical Industry

Pharmaceutical production can produce fumes and other process emissions. Scrubbers may be used as part of an exhaust treatment system to help control these pollutants.

Textile Processing

Textile processes may produce fumes and other unwanted emissions. A suitable scrubber can help treat exhaust air before discharge.

Oil and Gas Industry

Scrubbers can be used in oil and gas-related processes where specific gases or fumes need to be treated.

Steel Processing

Steel processing can generate dust, fumes, and other pollutants. Properly selected Industrial Scrubbers can form part of the exhaust treatment system.

Food Processing

Food processing facilities may also require exhaust treatment for cooking fumes, oil, grease, and other contaminants. Wet scrubbers can be used for appropriate applications.

Wastewater Treatment

Scrubbers can also be used in wastewater treatment facilities where gases and odours may be produced during the treatment process.

Other listed dry scrubber applications include asphalt processing, landfills and biogas, coating processes, tar removal, curing ovens, vinyl production, acid mist control, fertilizer manufacturing, electronics, and cocoa processing.

Dry Scrubber vs Wet Scrubber

The main difference between the two systems is the way pollutants are removed.

A Dry Scrubber does not use water as the primary cleaning medium. It is useful for applications involving certain gases, fumes, and high-temperature exhaust streams.

A Wet Scrubber uses liquid spray to capture contaminants. It can be useful for fumes, oil, grease, and other pollutants that may be trapped through contact with water.

The proper selection depends on the process, pollutant type, airflow, temperature, and project requirements.

Dry/Wet Scrubbers Manufacturers in Jammu and Kashmir

When selecting Dry/Wet Scrubbers Manufacturers in Jammu and Kashmir, it is critical to first understand the process and type of pollutants that need to be controlled.

The required airflow, pollutant concentration, temperature, operating hours, and available installation area should be checked before selecting the scrubber.

A properly selected system can work more efficiently with the entire exhaust and ventilation arrangement.

Dry/Wet Scrubbers Suppliers in Jammu and Kashmir

Reliable Dry/Wet Scrubbers Suppliers in Jammu and Kashmir can provide different scrubber configurations according to industrial requirements.

Before selecting a system, clients should provide data about the process, airflow, type of pollutant, temperature, and required capacity. This helps in selecting a suitable dry or wet scrubber.

How to Choose the Right Scrubber

Before selecting a scrubber, consider:

  • Type of pollutant
  • Required airflow
  • Pollutant concentration
  • Exhaust temperature
  • Required treatment approach
  • Available installation area
  • Operating hours
  • Water availability for wet scrubbers
  • Required scrubber capacity
  • Maintenance requirements

These factors help in selecting a scrubber that suits the real process requirement.

Why Proper Scrubber selection Matters

Different industrial processes produce different types of pollutants. A scrubber designed for one application may not be appropriate for another.

For this reason, the scrubber should be selected after understanding the exhaust characteristics and required airflow. Correct selection also helps the scrubber work well with blowers, ductwork, pumps, and other related systems.

FAQs

What is a Dry Scrubber?

A dry scrubber is a pollution control system that removes certain gases and particles from exhaust air without using water as the primary cleaning medium.

What is a Wet Scrubber?

A wet scrubber uses liquid spray to capture and remove pollution from an exhaust or air stream.

What is the capacity of the Dry Scrubbers?

The listed dry scrubber capacity is up to 12,000 CFM for a single unit and up to 60,000 CFM using multiple units.

What industries use Dry/Wet Scrubbers?

They can be used in pharmaceuticals, textile processing, food processing, metal processing, oil and gas, wastewater treatment, fertilizer manufacturing, asphalt processing, and several other industries.

How do I select between a Dry and Wet Scrubber?

The selection depends on the type of pollutant, airflow, exhaust temperature, system conditions, and the required method of pollution control.

Learn More

Conclusion

Dry/Wet Scrubbers Manufacturer in Jammu and Kashmir solutions can support pollution control requirements across different commercial and industrial applications. Dry scrubbers and wet scrubbers use different methods to deal with exhaust air, so the right system should be selected according to the process and pollutants.

FanAir India Pvt. Ltd. offers air management and pollution control solutions with dry and wet scrubber configurations designed around different industrial requirements.

Contact Us

Serving Jammu & Kashmir

Fan Air India Pvt. Ltd. manufactures dry and wet scrubbers that remove pollutants from exhaust gases. For customers in Jammu and Kashmir, our Dry & Wet Scrubbers are commonly used for chemical, pharmaceutical, process and kitchen exhaust treatment.

Jammu and Kashmir has growing industrial estates at Kathua, Samba, Bari Brahmana and Ghatti, covering pharmaceuticals, food processing and light engineering, together with hospitals, hotels and major road-tunnel infrastructure. Wide temperature swings between seasons make durable, correctly specified ventilation equipment important.

Every unit is built at our factory in Neemrana, Rajasthan and selected to suit the required airflow, static pressure and site conditions of your project. Our team can help with sizing and technical data before you order, and we dispatch finished equipment to sites across Jammu and Kashmir and the rest of India.

To get a quotation for Dry & Wet Scrubbers in Jammu and Kashmir, share your airflow, pressure and application details through our contact page, call +91-9811347199 or email saurabh.joshi@fanair.in.

Other Fan Air products in Jammu and Kashmir

Dry & Wet Scrubbers in other locations