+91-9811347199 saurabh.joshi@fanair.in
/// ESTD 2016

HVLS Fans in Kolkata

HVLS Fans Manufacturers in Kolkata


Circulate air across
20 meters from the fan's centre in all directions.
Technology
Aerofoil Blades, which ensure maximum air flow and minimum power consumption.
Range
12ft to 24ft
Covers air flow
229000 cfm to 377000 cfm.

High-Volume Air Circulation for Large Spaces

High Volume Low Speed (HVLS) fans are designed to move large amounts of air at low speeds across extensive indoor areas. They improve air movement and indoor comfort in warehouses, factory sheds, logistics hubs, gyms, large halls, commercial buildings, and other spacious environments. Their large-diameter aerofoil blades are designed to offer large airflow coverage while keeping energy consumption low.

For projects requiring HVLS Fans Suppliers in Kolkata, fan selection must consider the size of the space, required airflow, ceiling height, operating conditions, and installation requirements. The current range covers 12 ft to 24 ft fan sizes and provides airflow from 229,000 CFM to 377,000 CFM.

Contact Us
HVLS fan installation in Kolkata

HVLS Fan Range and Technology

HVLS fans work on the principle of moving a large quantity of air at a relatively low rotational speed. Instead of creating a narrow high-speed airflow, they distribute air over a much wider area. This makes them suitable for large spaces where consistent air movement is required.

The current product range uses aerofoil blades designed to provide maximum airflow with minimal energy consumption. The fans can circulate air across approximately 20 metres from the fan centre in all directions, depending on the installation and operating conditions.

For customers looking for HVLS Fan Manufacturer in Kolkata, the available 12 ft to 24 ft range offers different size options for large commercial, industrial, and institutional spaces.

Aerofoil Blade Design

Aerofoil blades are a vital part of HVLS fan performance. Their aerodynamic profile helps circulate a large quantity of air while maintaining efficient operation. The current Kolkata product page specifically states that the aerofoil blade technology is designed to ensure maximum airflow and minimum energy consumption.

The large blade span allows the fan to influence a wide floor area. This can support general air movement in facilities where traditional small fans may not offer sufficient coverage across the complete area.

Key Features of HVLS Fans

HVLS fans offer several features for large-area ventilation and air movement:

  • High Volume Low Speed operation
  • Large airflow coverage
  • Aerofoil blade technology
  • 12 ft to 24 ft size range
  • Airflow from 229,000 to 377,000 CFM
  • Air movement across approximately 20 metres from the fan centre
  • Designed for minimum energy consumption
  • Suitable for large indoor areas
  • Useful for warehouses and factory sheds
  • Suitable for logistics hubs and large halls
  • Applicable to gyms and commercial buildings
  • Designed to improve ventilation and indoor comfort

Technical Specifications

Product TypeHigh Volume Low Speed Fan
Fan TechnologyHVLS
Blade DesignAerofoil Blades
Fan Range12 ft – 24 ft
Airflow Range229,000 – 377,000 CFM
Air Circulation CoverageApproximately 20 metres from fan centre in all directions
Operating PrincipleHigh Volume / Low Speed
Primary BenefitLarge-area air circulation
Power FocusMinimum energy consumption
ApplicationsWarehouses, Factory Sheds, Logistics Hubs, Gyms, Large Halls, Commercial & Industrial Buildings

These specifications are based on the current Kolkata HVLS fan product information.

Applications in Kolkata

Kolkata is an important industrial and commercial centre in eastern India. The area has engineering, jute, food processing, and chemical industries, along with close links to steel and power plants. The city also has hospitals, shopping malls, high-rise developments, warehouses, logistics facilities, and large commercial spaces requiring reliable HVAC and air movement.

HVLS fans can be used in:

  • Warehouses
  • Factory sheds
  • Logistics hubs
  • Manufacturing facilities
  • Gyms
  • Large halls
  • Commercial buildings
  • Industrial facilities
  • Distribution centres
  • Large indoor work areas
  • Institutional areas
  • High-ceiling facilities

For Industrial HVLS Fans Manufacturer in Kolkata requirements, the fan size and airflow should be selected according to the size of the facility, ceiling conditions, required air movement, and application.

Benefits of HVLS Fans

Wide Air Coverage

The large diameter of an HVLS fan allows air to be circulated across a wide floor area. The current range is designed to circulate air across about 20 metres from the fan's centre in all directions.

High Airflow

The listed airflow range of 229,000 to 377,000 CFM makes these fans appropriate for large spaces where large-scale air movement is required.

Energy-Conscious Operation

Aerofoil blade technology is designed to provide maximum airflow while using minimal energy. This makes energy consumption an essential consideration when planning air circulation for large facilities.

Improved Air Circulation

HVLS fans circulate large amounts of air at low speeds, helping distribute air across large indoor areas and supporting improved circulation and comfort.

Suitable for Large Facilities

The 12 ft to 24 ft range provides different size options for warehouses, factories, logistics facilities, gyms, halls, and industrial buildings.

How to Choose the Right HVLS Fan

Selecting an HVLS fan should start with an assessment of the building or facility. The floor area, ceiling height, available installation position, required airflow, and intended use should all be considered.

The fan diameter is another critical factor. Larger areas may require large fan configurations, while the arrangement of multiple fans can be considered for facilities with different zones or larger floor areas.

Airflow requirements and site conditions should also be reviewed before final selection. For a Kolkata project, the operating environment, building design, ceiling structure, and intended application can help determine the appropriate fan size and configuration.

For HVLS Fans Manufacturer in India requirements, customers can provide airflow, pressure, application, and location information for technical evaluation and sizing support. The current Kolkata page states that systems are selected according to required airflow, static pressure, and project site conditions.

Manufacturing and Supply for Kolkata

The HVLS fan systems are manufactured at the factory in Neemrana, Rajasthan. According to the current Kolkata site, every unit is selected according to the required airflow, static pressure, and project site conditions. Technical support for sizing and technical data is available before ordering, with finished equipment dispatched to Kolkata and other locations across India.

For projects requiring HVLS Fans Suppliers in Kolkata, sharing the facility size, application, airflow requirements, and site conditions can help determine an appropriate fan configuration.

Frequently Asked Questions

What are HVLS fans used for?

HVLS fans are used to circulate large amounts of air across spacious indoor areas. Common applications include warehouses, factory sheds, logistics hubs, gyms, large halls, commercial buildings, and industrial facilities.

What sizes of HVLS fans are available?

The current Kolkata range covers fan sizes from 12 ft to 24 ft.

What is the airflow capacity?

The listed airflow range is 229,000 CFM to 377,000 CFM.

How far can the fan circulate air?

The current product page states that the fans can circulate air across approximately 20 metres from the fan centre in all directions. Actual coverage can depend on installation and site conditions.

What information is needed for HVLS fan selection?

The facility size, ceiling conditions, application, required airflow, installation location, and site conditions need to be considered when selecting an HVLS fan. Technical sizing can then be performed according to the project requirements.

Learn More

Conclusion

HVLS fans offer a practical solution for large-area ventilation in warehouses, factories, logistics facilities, gyms, halls, and industrial buildings. With aerofoil blade technology, a 12 ft to 24 ft range, airflow from 229,000 to 377,000 CFM, and coverage of about 20 metres from the fan centre, the current range can support different large-area ventilation requirements. FanAir India Pvt. Ltd. manufactures these fans at its Neemrana facility and supplies them to Kolkata and other places throughout India.

Contact Us

Serving Kolkata

Fan Air India Pvt. Ltd. manufactures High Volume Low Speed (HVLS) fans that circulate air gently across very large floor areas. For customers in Kolkata, our HVLS Fans are commonly used for warehouses, factory sheds, logistics hubs, gyms and large halls.

Kolkata is the commercial gateway to eastern India, with engineering, jute, food processing and chemical industries, and close links to the steel and power plants of the eastern belt. Hospitals, malls and high-rise projects across the city also require dependable HVAC and life-safety ventilation in a hot, humid climate.

Every unit is built at our factory in Neemrana, Rajasthan and selected to suit the required airflow, static pressure and site conditions of your project. Our team can help with sizing and technical data before you order, and we dispatch finished equipment to sites across Kolkata and the rest of India.

To get a quotation for HVLS Fans in Kolkata, share your airflow, pressure and application details through our contact page, call +91-9811347199 or email saurabh.joshi@fanair.in.

Other Fan Air products in Kolkata

HVLS Fans in other locations